Double PVC/nitrile coating on polyamide lining. Gauge 18. Third rough PVC/nitrile coating on hand. Length: 30 cm. Thickness: 1 mm on cuff - 1.10 mm on palm.
Support: 100% polyamide.
Coating: PVC/ nitrile.
EN420:2003+A1:2009 General requirements
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
| 3 | Resistance to abrasion (from 1 to 4) | |
| 1 | Resistance to cutting (from 1 to 5) | |
| 2 | Resistance to tear (from 1 to 4) | |
| 1 | Resistance to puncture (1 to 4) | |
| X | Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F) |
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms - Part 1: Terminology and performance requirements for chemical risks.
| TYPE | B | Type B - Water and air tightness according to EN374-2:2014. Permeation resistance to at least 3 chemicals at level 2 according to EN16523-1: 2015 (from 1 to 6). |
| . | Determination of resistance to degradation by chemicals according to EN374-4: 2013. Part 4: Determination of resistance to degradation by chemicals. | |
| K | 6 > 480 mn | Caustic soda 40% (K) CAS 1310-73-2 |
| L | 4 > 120 mn | Sulphuric acid 96 % (L ) CAS 7664-93-9 |
| M | 2 > 30 mn | Nitric acid 65% (M) CAS 7697-37-2 |
| P | 6 > 480 mn | Hydrogen peroxide 30% (P) 7722-84-1 |
Îți respectăm confidențialitatea. Nu vom partaja datele tale și nu vei primi spam. Te vei putea dezabona oricând.
